Winner Ball Valves Company Limited.

Enterprise News

Industry News

Video

How to use and adjust the valve supporting the transmitter

What can the transmitter do? In industrial production, the measurement element will be pressure, temperature, flow, level and other parameters detected, the need for the transmitter will be measured components of the unified signal conversion to a standard signal source (such as 4 ~ 20mA DC power supply), sent to the display Instrumentation or adjustment of the instrument for display, recording or adjustment. Therefore, the transmitter is a conversion medium, it is a medium.

2017-08-11

Importance of part code of the valve product

Material coding is the key technology to realize the informationization of the enterprise, and also the foundation of the advanced production management methods such as ERP and MES. This paper describes the function and general principles of enterprise material coding, and introduces the coding rules of copper valve parts of a valve company and the influence of the coding rules on the production management of the

2017-07-27

Traps Introduction

Steam traps, the basic role is to steam system in the condensate, air and carbon dioxide gas as soon as possible; at the same time to maximize the automatic prevention of steam leakage. There are many varieties of traps, each with different performance.

2017-07-21

How to Install O-Rings

The traditional O-ring installation method is generally by the workers using manual installation, not with any external tools. The manual assembly method is very inefficient, the worker's labor intensity is very large, and in the assembly process O-ring is easy to damage or accompanied by foreign body mixing, affecting product performance and appearance. The following video describes the installation of O-ring several methods and process tooling. I hope to be helpful.

2017-07-11

When Pump Started, Should Output Valve be Closed?

Under normal circumstances, start the centrifugal pump, in accordance with the norms should be the first pump cavity filled with media, close the outlet valve, and then open the pump, the purpose is: on the one hand to prevent the starting current is too large damage to the motor; the other hand, Loss of pressure, causing pump cavitation. But many problems can not be generalized!

2017-07-04

Installation of 6 Piping Valves

Also known as gate valve, is the use of gate to control the opening and closing of the valve, by changing the cross-section to adjust the flow and opening and closing pipeline. Gate valve is used for the fluid medium to do the full or full closed operation of the pipeline. Gate valve installation generally non-directional requirements, but can not flip.

2017-06-29

Valves Installation

A pre-installation check 1. Check carefully check the valve model, specifications meet the requirements of the drawings. 2. Check valve stem and valve flap is flexible, with or without jamming and skew.

2017-06-22

Four Main Functions of Valves

1.CloseandopenmediaTheflowpathisastraight-throughvalvewithasmallflowresistanceandisusuallyselectedasavalveforcut-offandopenmedia.Downclosedvalve(cut-offvalve,plungervalve)duetoitschanneltwistsandturns

2017-06-21

Motorized Electric Ball Valve Common pressure, temperature, material valve classification details

Valve press classification Vacuum valve - valve with working pressure lower than standard atmospheric pressure. Low pressure valve - nominal pressure PN less than 1.6MPa valve. Medium pressure valve - nominal pressure PN 2.5 ~ 6.4MPa valve. High pressure valve - nominal pressure PN10.0 ~ 80.0MPa valve. Ultra-high pressure valve - Nominal pressure PN greater than 100MPa valve.

2017-06-09

About Motorized V-Ball Valve (Universal) Features

Motorized V-type ball valve Motorized V-type ball valve, alias: V-type shut-off valve, V-type ball valve adjustment; This motorized ball valve is a fixed ball valve, but also a single seat sealed ball valve, the ball is the best performance adjustment, and its V-shaped cut between the metal seat With shear, especially for fiber, tiny solid particles, slurry and other media is the most popular under a ball valve.

2017-05-31

< 1 > proceed page